Patient transfer roll

Description

1- Purpose:

• Creating scientific and practical information about the use of the product and how it works and the main components of the product.

2- Scope of application: 1-2- Operators, doctors, operators and personnel affecting the quality of the product and its after-sale services 3- Responsibility and authority: – None 4- Definitions: 1- None. 5- Slider product description – Slider is used for the safe head of the patient and to move him from one bed to another, and since the distribution of body weight is in the upper half of the human body, this mattress is suitable for patients of any height and A weight can be used. Due to this characteristic, it is most used when transferring the patient from the operating room bed to the recovery bed, as well as transferring the patient from the recovery bed to the beds in the ward. This product is light and has the ability to bend in the middle. Then the patient’s head is lifted with both hands and when it is transferred to the adjacent bed, the bed is removed from under the patient’s body. Rayin Sanat company has used the best products available in the market for the production of patient transfer beds, which are as follows: – The inner core is made of Teflon, on which cloud or foam is drawn. This teflon plate has minimal elastic deformation over time or use and is completely unaffected by water penetration. In this device, due to the use of a thin but bend-resistant teflon layer, as well as high strength in addition to low weight, it adds to the capabilities of the product and results in a very practical product that has been welcomed by all medical centers. A layer of protective foam is stretched over the Teflon core, and then a cover made of tarpaulin or PVC is placed on it, and its edges are pressed with HIGH FREQUENCY pressing (welding) technique or sewn with resistant thread. Another sliding layer of PVC material surrounds the entire bed as a complete cover so that the set can be used. One of the advantages of using PVC and tarpaulin covers is that they can be washed and their side effects and sensitizing effects on the patient’s body are insignificant in case of possible contact. In general, the use of the above-mentioned materials creates high efficiency in terms of strength and performance against the low weight of the product. which can play a fruitful role in the comfortable performance of nurses and paramedics and greatly reduce the pain in the bodies of the wounded and patients when moving them. For this product, a lifespan equal to 5 years is considered, and the documents related to the production of each product are archived for 5 years. It should be noted that the company is obliged to guarantee the product for one year and after-sales service for 10 years. *Technical specifications: – Use of teflon or foam to make a central core – Optimal dimensions according to the width and length of the beds used and the body size of the patients in terms of weight distribution (head to the bottom of the spine) – Use of PVC as a cover. which can be washed and creates a very good slip on the tarpaulin or PVC sheet below. This layer is easily removed from the bed and washed and easily covered again on the bed.

Note: When using an auxiliary bed, make sure that both the bed on which the patient is placed and the bed to which the patient will be transferred are locked.